XJR (X300) L6-4.0L SC (AJ16) (1995)
Drive Belt: Service and Repair
Supercharger Belt, Tensioner Pulley/Adjuster
SUPERCHARGER DRIVE BELT TENSIONER PULLEY CARRIER AND ADJUSTING BOLT, RENEW
-
Follow the procedure for renewing the tensioner bracket up to the removal of the pulley carrier.
-
Remove the pulley carrier and adjusting bolt from the bracket and discard the carrier and bolt.
-
Fit a new pulley carrier and adjusting bolt to the tensioner bracket.
-
Follow the procedure for renewing the tensioner bracket after the fitting of the pulley carrier.