XJR (X308) V8-4.0L SC (AJ26) (1998)
Output Shaft: Service and Repair
Rear Seal - Output Shaft Drive Flange
Special Service tools
-
Oil Seal Replacer
-
205-053 Driveshaft Wrench
Removal
1. Disconnect the battery ground lead.
2. Select N and chock the road wheels.
3. Remove the front muffler.
4. Remove the engine rear mounting bracket.
Support the transmission.
Remove the bolt engine rear mounting to transmission.
Remove the four bolts which secure the mounting cross member to the body.
5. Detach the driveshaft from the transmission drive flange.
If the transmission is to be refitted, mark the position of the coupling relative to the drive flange.
CAUTION: Under no circumstances remove the driveshaft to flexible coupling fixings.
Remove the three bolts, transmission drive flange to flexible coupling.