XK (X150) V8-4.2L (2008)
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the front brake pads.
3. Remove the brake caliper anchor plate.
> Remove and discard the 2 bolts.
4. Remove the brake disc.
> Remove the 2 clips.
Installation
1. WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.
Install the brake disc.
> Clean the component mating faces.
> Secure the clips.
2. Install the brake caliper anchor plate.
> Clean the component mating faces.
> Tighten the bolts to 115 Nm (85 lb.ft).
3. Install the brake pads.