XK (X150) V8-4.2L (2008)
Acceleration Sensor: Service and Repair
Front Suspension Vertical Accelerometer
Front Suspension Vertical Accelerometer
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the windshield washer reservoir.
3. CAUTION: Make sure the accelerometer is not dropped as damage will be caused to the internal components.
Remove the accelerometer.
^
Remove the 2 nuts.
^
Disconnect the electrical connector.
Installation
1. Install the accelerometer.
^
Tighten the nuts to 8 Nm (6 lb.ft).
^
Connect the electrical connector.
2. Install the windshield washer reservoir.