XK (X150) V8-4.2L SC (2007)
REPAIR PROCEDURE
INSTALL AMPLIFIER COOLING FAN
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home> NAS > Service Information/X150 - XK/Service Information/2007 > Workshop Manuals> Bookmark "Body and Paint/Body and
Paint/501
1.
Disassemble the vehicle for repair as follows:
^
Refer to GTR Section: 501-10 (76.70.01) and remove passenger front seat
^
Refer to GTR Section: 501-05 (76.13.73) and remove rear quarter trim panel
^
Refer to GTR Section: 501-10 (76.30.38) and remove rear seat backrest
^
Refer to GTR Section: 501-10 (76.70.37) and remove rear seat cushion
^
Refer to GTR Section: 501-12 (76.25.01) and remove floor console for access only
^
Refer to GTR Section: 501-05 (76.13.31) and remove A-Pillar trim for access only
^
Remove passenger carpet for access.
^
Remove passenger toe board. (Figure 1)
2.
If the vehicle VIN is before B04688, cut away a section of the fascia insulation layer to create additional space for the fan. (Figure 2)