XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
/v8-4.0l_sc_(aj27)/Page-930012.png)
-
Ensuring shims remain positioned on sleeve, position hub carrier assembly on wishbone.
14. Secure hub carrier to wishbone.
-
Install pivot pin.
-
Install pivot pin washer
-
Install but do not tighten pivot pin nut.
15. Install hub on axle shaft.
-
Route handbrake cable through hub carrier.
-
Apply Loctite 270 to axle shaft splines and thread, and fully seat hub on shaft.
