Cherokee 2WD L4-150 2.5L VIN P MFI (1991)
Trim Panel: Service and Repair
A-Pillar Trim, Quarter Trim And Extension Panels
A-PILLAR TRIM REMOVAL
1. Remove the retaining screws and the inner scuff plate, cowl side trim panel and headliner front trim molding from the interior of the vehicle.
2. Remove the retaining screws and the windshield side molding from the A-pillar and door header.
INSTALLATION
1. Position the A-pillar trim on the A-pillar and door header. Install the retaining screws and tighten to 1 Nm(11 in. lbs.) torque.
2. Install the headliner front trim molding, the cowl side trim panel and the inner scuff plate in the interior of the vehicle.
LOWER A-PILLAR COWL TRIM REMOVAL-RIGHT HAND
1. Remove the inner scuff plate.
2. Remove the nut behind the fuse panel access door.
3. Remove the cowl side trim panel from the cowl side panel.
REMOVAL-LEFT HAND
1. Remove the inner scuff plate.
Cowl Side Trim Panel
2. Remove the screws and cowl side trim panel from the cowl side panel.
INSTALLATION
1. Position the cowl side trim panel on the cowl side panel.
2. Install the screws/nut. Tighten the screws/nut to 2 Nm (20 in. lbs.) torque.
3. Install the inner scuff plate.
