Cherokee 4WD L6-4.0L VIN S (1998)
Installing Spacer Sleeve On Sector
3. Install new spacer sleeve on sector.
4. Lubricate manual valve shaft with petroleum jelly and install it through the left side of the transmission case.
5. Lubricate sector and sleeve with petroleum jelly and install them on shaft.
6. Install the manual valve shaft through the remainder of the transmission case.
7. Align hole in spacer sleeve with notch in sector. Then install shift sector roll pin. Tap pin into sector and shaft and securely stake sleeve to sector
and shaft.
8. Connect park rod to sector.
Installing Park Rod Bracket
9. Install park rod bracket. Tighten bracket bolts to 10 Nm (7 ft. lbs.) torque.
10. Install valve body, oil screen and oil pan.
11. Install park/neutral position switch.
