Cherokee 4WD LHD L6-4.0L VIN S (2001)
Fig.27 Front Shoulder Belt - 2-Door Module
Fig.28 Front Shoulder Belt - 4-Door Module
1. Position the front seat shoulder belt and retractor to the B-pillar in the vehicle or.
2. Install and tighten the screw that secures the retractor (2-door models) or the retractor and lower seat belt anchor plate (4-door models) to the
B-pillar.Tighten the screw to 43 Nm (32 ft.lbs.).
3. On 2-door models only, reinstall B-pillar lower trim onto the B-pillar.
4. On 4-door models only, reinstall the inner sill trim onto the sill panel.
