Commander 2WD V6-3.7L (2009)
NOTE: Before installing threaded plug in right cylinder head, the plug must be coated with sealant to prevent leaks.
24. Coat the large threaded access plug (2) with Mopar(R) Thread Sealant with Teflon, then install into the right cylinder head and tighten to 81
Nm (60 ft. lbs.).
25. Install the oil fill housing.
26. Install access plug (1) in left cylinder head.
27. Install power steering pumpSee: Steering and Suspension/Steering/Power Steering/Power Steering Pump/Service and Repair/Removal and
Replacement/Power Steering Pump - Installation
28. Fill cooling system See: Cooling System/Service and Repair
29. Connect negative cable to battery.