Commander 2WD V8-4.7L Flex Fuel (2009)
Power Steering Line/Hose: Service and Repair
Power Steering Hose - Installation
Pressure Hose - Gear to Pump
PRESSURE HOSE - GEAR TO PUMP
1. Install the line (2) to the vehicle.
2. Install the three mounting brackets (6) for the pressure line (2) to the engine cradle.
3. Reconnect the power steering pressure line (2) to the power steering gear (7) Tighten to 28 Nm (21 ft.lbs.).
4. Reconnect the power steering pressure line (2) to the power steering pump (1) Tighten to 28 Nm (21 ft.lbs.).
5. Refill the power steering fluid and bleed the system See: Service and Repair/Power Steering System Bleeding.
Return Hose - Pump to Cooler
RETURN HOSE - PUMP TO COOLER
