Commander 2WD V8-5.7L VIN 2 (2006)
Power Steering Line/Hose: Service and Repair
Pressure Line - Pump to HEC
PRESSURE LINE - PUMP TO HEC
REMOVAL
1. Siphon the power steering fluid from the reservoir.
2. Remove the air cleaner assembly.
3. Disconnect the power steering pressure line from the power steering pump.
4. Raise and support the vehicle.
5. Remove the front splash shield.
6. Remove the 3 bolts (2) for the oil filter drip tray (1) and remove the tray.
7. Disconnect the power steering pressure line (2) from the hec fan (1).
8. Remove the line from the vehicle.
INSTALLATION
