Commander 4WD V6-3.7L (2009)
LOWER VALVE BODY SECTION 3
6. Lubricate and install the 1-2 / 4-5 Command valve assembly (1), 1-2 / 4-5 Holding Pressure Shift Valve (2) and the 1-2 / 4-5 Shift Pressure
assembly (3) into the valve body.
7. Install the side cover and the screws holding the side cover (4) to the valve body and valve housing. Tighten the screws to 4 Nm (35 in.lbs.).
NAG1 VALVE BODY SPRING DIMENSION
