Commander 4WD V8-4.7L VIN N (2006)
Memory Positioning Module: All Technical Service Bulletins
Seats/Steering Column - Won't Return to Memory Positions
NUMBER: 08-024-06
GROUP: Electrical
DATE: May 24, 2006
THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.
StarSCAN(R) UPDATE CD 6.05 WAS THE LAST CD TO CONTAIN FLASH FILES.
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 08-027-05, DATED MAY 25, 2005, WHICH SHOULD BE REMOVED
FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE ADDITIONAL MODELS AND YEAR,
REVISED NOTE, SYMPTOM/CONDITION, REPAIR PROCEDURE, LABOR OPERATION NUMBER AND FAILURE CODE.
SUBJECT:
Flash: Memory Seat/Memory Steering Column
OVERVIEW:
This bulletin involves reprogramming the Memory Seat Module (MSMD) with new software.
MODELS:
2004 - **2006**
(HB)
Durango
**2006
(LE)
300C/300C Touring (International Markets)**
2005 - 2006
(LX)
300
2005 - **2006**
(WH)
Grand Cherokee (International Markets)
2005 - **2006**
(WK)
Grand Cherokee
**2006
(XH)
Commander (International Markets)**
**2006
(XK)
Commander**
NOTE:
This bulletin applies to vehicles built with Memory Seat Module part numbers **04602326AF - AN, 04602437AF - AN, 04602440AF - AN,
04602441AF - AN, 04602796AA, 04602797AA, 04602798AA, and 04602799AA.**
SYMPTOM/CONDITION:
Driver's seat and steering column do not return to their memory driving positions and/or erroneous seat, pedal and steering column motor control circuit
performance DTCs occur, **or the system is intermittently inoperative**.
DIAGNOSIS:
If the vehicle operator describes the above Symptom/Condition, perform the Repair Procedure.
**REPAIR PROCEDURE - USING THE INTERNET TO RETRIEVE THE FLASH FILE:
NOTE:
Before performing this Repair Procedure, the operating software in the StarSCAN(R); must be programmed with software release level 6.06 or
higher.
The software release level is visible in the blue header at the top of the StarSCAN(R) screen.
NOTE:
The StarSCAN(R) diagnostic scan tool fully supports Internet connectivity. However, to take advantage of this feature you must first configure the
StarSCAN(R) for your dealership's network. Make sure the StarSCAN(R) is configured to the dealership's network before proceeding. For
instruction on setting up your StarSCAN(R) for the dealer's network refer to either: "DealerCONNECT > Service > StarSCAN and StarMOBILE
tools > Online Documentation", or refer to the StarSCAN(R) Quick Start Networking Guide. The StarSCAN(R) Quick Start Networking Guide is
also available on the website under the "Download Center".
