Compass 2WD L4-2.4L (2008)
Rear Door Hinge: Service and Repair
Rear Door Hinge - Installation
INSTALLATION
UPPER HINGE
NOTE: A suitable body sealant should be used when removing or moving the hinges.
1. Install the nuts (2) and tighten to 13 Nm (9.5 ft. lbs.).
2. Install the two hinge to B-pillar bolts (3).
3. Tighten the bolts to 22 Nm (16 ft. lbs.).
4. Adjust the door if needed, See: Adjustments.
LOWER HINGE
