jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

M/T (6 Speed) - Won't Stay in Reverse Gear|Page 6842 > < M/T (6 Speed) - Won't Stay in Reverse Gear|Page 6840
Page 11
background image

9.

Rotate the plastic clip in the counterweight hole.

10.

Install the latch rod to the plastic clip. Verify that the latch rod is fully engaged to the clip.

11.

Verify repair.

12.

Install the glass run channel and attaching bolts. Tighten the attaching bolts to 10 Nm (90 in. lbs.).

13.

Verify correct window glass operation.

14.

Install the water shield.

15.

Replace the door trim panel plastic retainers.

16.

Install the door trim panel to the door.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

M/T (6 Speed) - Won't Stay in Reverse Gear|Page 6842 > < M/T (6 Speed) - Won't Stay in Reverse Gear|Page 6840