Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
Power Steering Line/Hose: Service and Repair
Pressure Line - Pump to Gear
PRESSURE LINE - PUMP TO GEAR
REMOVAL
1. Siphon the power steering fluid from the reservoir.
2. Remove the air cleaner assembly.
3. Disconnect the power steering pressure line from the power steering pump.
4. Raise and support the vehicle.
5. Remove the front splash shield.
6. Remove the 3 bolts (2) for the oil filter drain (1) and remove the drain.
7. Disconnect the power steering pressure line (2) from the power steering gear (1).
8. Remove the line from the vehicle.
INSTALLATION