Grand Cherokee 4WD V8-4.7L Flex Fuel (2009)
Memory Positioning Module: Service and Repair
Memory Seat Module - Installation
INSTALLATION
CAUTION: The Memory Seat Module (MSM) mounting tabs can be damaged during module installation. Use care to properly align tabs to
prevent binding that could result in tab breakage.
1. Place the module (4) into position making sure the mounting tabs are properly aligned with the front bracket.
2. Push down on the rear of the module (4) snapping the retaining clips into place in the side brackets.
3. Connect the MSM rear harness connectors (1).
4. Connect the MSM front harness connectors.
5. Install the driver seat cushion/cover (2) See: Body and Frame/Seats/Seat Cover/Service and Repair/Seat Cushion Cover - Installation.
6. Connect the battery negative cable.
7. Using an appropriate scan tool go to the MSM miscellaneous functions and perform the standardization routine.
8. Verify system and vehicle operation.
