Grand Cherokee 4WD V8-4.7L Flex Fuel (2009)
Seat Heater Control Module: Service and Repair
Heated Seat Module - Removal
REMOVAL
CAUTION: The Heated Seat Module mounting tabs can be damaged during module removal and installation. Use care to properly align tabs
to prevent binding that could result in tab breakage.
1. Position the right front seat to the full rearward position.
2. Disconnect and isolate the battery negative cable.
3. Disconnect the wire harness connector (2) from the heated seat module (3).
4. Unsnap the heated seat module retaining clips from the mounting bracket (4).
5. Remove the heated seat module (3) from the vehicle.
