Liberty 2WD V6-3.7L (2008)
Rear Door Panel: Service and Repair
Rear Door Trim Panel - Removal
REAR DOOR PANEL REMOVAL
1. Remove the door handle trim bezel (3).
2. Remove the power window switch (1) and disconnect the electrical connector (2).
3. Using a very thin pry tool, release the cap screw covers (2) from the door trim.
4. Remove the screws (1) from the front door trim.
5. Carefully remove the door trim panel from the door, by lifting upward until it is removed from the door lock and the mounting attachments (3) on
the carrier plate.