Liberty 2WD V6-3.7L (2008)
1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system See: Service and Repair/Procedures/Refrigerant System Recovery.
3. Remove the air cleaner housing See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air
Filter Element/Service and Repair/Removal.
4. Remove the nut (2) that secures the A/C suction line (1) to the A/C compressor (4).
5. Disconnect the A/C suction line from the A/C compressor and remove and discard the O-ring seal and gasket.
6. Remove the nut (2) that secures the A/C suction line (1) and the A/C liquid line (4) to the A/C expansion valve (3) and disconnect the lines from
the valve.
7. Separate the A/C liquid line from the A/C suction line and remove the suction line from the engine compartment.
8. Install plugs in, or tape over the opened refrigerant line fittings and the compressor and expansion valve ports.
