Liberty 2WD V6-3.7L (2008)
1. Install the hose to the vehicle.
2. Install the 3 push pins and install the front fascia into position.
3. Install the hose to the cooler (1) and reclamp (2) with a new hose crimp clamp.
4. Install the return hose assembly routing clip (1).
5. Install a new hose clamp for the cooler to reservoir hose (2) to the reservoir (1).
6. Lower the vehicle.
7. Fill and bleed power steering system See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and Repair.
8. Inspect for leaks.
Return Hose - Cooler To Gear
RETURN HOSE - COOLER TO GEAR