Liberty 2WD V6-3.7L (2008)
6. Using an appropriate flat bladed tool, depress the four mounting clips to disengage and remove the TIPM housing (1) from the TIPM bracket
mounting tabs (3).
7. Disconnect each of the seven TIPM wire harness connectors from the TIPM housing (2).
8. Remove the TIPM from the vehicle.
9. Remove the TIPM bracket retaining screws (1) and slide the bracket (2) rearward to disengage the mounting tabs (3). Remove the TIPM bracket
from the battery tray (4).
