Liberty 2WD V6-3.7L (2008)
7. Install the lower stabilizer link (1) at the lower control arm. Tighten the bolt (2) to 102 Nm (75 ft.lbs.) with full vehicle weight. See: Stabilizer
Bar/Stabilizer Link/Service and Repair/Front Stabilizer Link - Installation.
8. Install the left tire and wheel assembly. See: Wheels and Tires/Service and Repair/Removal and Replacement.
9. Lower the vehicle.
10. Install the battery tray (1) See: Starting and Charging/Battery/Battery Tray/Service and Repair/Battery Tray - Installation.
11. Install the battery See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery - Installation.
12. Reinstall the power center (2) back into place.
13. Reconnect the battery cables (3).
Right Side
RIGHT SIDE
1. Install the spring to the shock (if removed). See: Suspension Spring ( Coil / Leaf )/Service and Repair/Front Spring - Installation.
2. Install the shock assembly (1) to the vehicle.
3. Install the four upper shock mounting nuts. Tighten the nuts to 108 Nm (80 ft.lbs.).
4. Raise the knuckle (3) into place and reconnect the upper ball joint nut. Tighten the nut to 41 Nm (30 ft.lbs.) plus an additional 90° turn.