Liberty 4WD L4-2.4L DOHC VIN 1 (2005)
11.
Install a new anti-rattle strap to each rear caliper assembly, the center section of anti-rattle strap should be flush with the caliper valley/window
when correctly installed, (Fig. 1).
12.
Install both rear wheel and tire assemblies. Torque the rear wheel lug nuts to 135 Nm (100 ft. lbs.).
13.
Lower the vehicle.
14.
Before moving the vehicle, apply the service brake pedal several times.
15.
Verify proper service and parking brake operation.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.