Liberty 4WD L4-2.4L DOHC VIN 1 (2005)
2. Install camshaft seals into cylinder head using Special Tool MD-998306 until flush with head (Fig. 14).
3. Install timing belt rear cover.
NOTE: Target ring tab should provide positive snap-on fit on the camshaft.
4. Install exhaust camshaft target ring with the word FRONT facing forward.
5. Install exhaust camshaft sensor.
6. Install camshaft sprockets. Hold each sprocket with Special Tool 6847 and tighten center bolt to 101 Nm (75 ft. lbs.).
7. Install timing belt and front covers.
