Liberty 4WD V6-3.7L (2009)
Marker Lamp Bulb: Service and Repair
Position Lamp Bulb - Removal
BULB - POSITION LAMP
NOTE: The following procedure applies only to vehicles manufactured for export markets. Vehicles manufactured for domestic markets do
not have a position lamp bulb, socket or wiring provided in the front lamp unit.
1. Disconnect and isolate the battery negative cable.
2. Disconnect the wire harness connector from the connector receptacle integral to the position lamp bulb socket (2) on the back of the front lamp
unit housing (1) located on the back of the front end module carrier.
3. Firmly grasp the position lamp bulb socket on the back of the housing and rotate it counterclockwise about 30 degrees to unlock it.
4. Pull the socket and bulb straight out from the keyed opening in the housing.
5. Pull the base of the bulb straight out of the socket.