jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Front Door Latch|Service and Repair|Page 5682 > < Front Door Hinge|Service and Repair|Page 5678
Page 1
background image

Front Door Latch: Service and Repair

LATCH 

REMOVAL 

1. Disconnect and isolate the battery negative cable.

2. Remove the waterdam as necessary to gain access to the latch. Refer to Front Door Panel.

3. Remove rear glass run channel bolts (2) and position the channel aside.
4. Disconnect the exterior handle rod at the handle.

Front Door Latch|Service and Repair|Page 5682 > < Front Door Hinge|Service and Repair|Page 5678