Wrangler L6-4.0L VIN S (2000)
Glove Box Latch Striker Remove/Install
3. Remove the two screws that secure the latch striker to the grab handle bezel at the top of the instrument panel glove box opening.
4. Remove the latch striker from the instrument panel.
INSTALLATION
1. Position the latch striker onto the instrument panel.
2. Install and tighten the two screws that secure the latch striker to the grab handle bezel at the top of the instrument panel glove box opening.
Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Install the glove box onto the instrument panel.
4. Reconnect the battery negative cable.
