Wrangler L6-4.0L VIN S (2000)
Evaporative Emission Control Canister: Service and Repair
EVAP Canister, Purge Solenoid and LDP Location
The EVAP canister is mounted to a bracket, located in the engine compartment, on the left front inner fender.
REMOVAL
1. Disconnect vacuum lines/hoses at EVAP canister. Note location of lines/hoses before removal.
EVAP Canister Removal/Installation
2. Remove canister mounting bolt.
3. Disengage canister from vehicle by slipping 2 canister dowel pins from rubber mounting bracket bushings.