Wrangler 2WD V6-3.8L (2008)
4. Disconnect the track bar from the axle bracket (3). See: Lateral Stabilizer Rod/Service and Repair/Rear/Removal.
5. Lower the axle until the spring (1) is free from the upper mount seat and remove the spring (1).
Rear Spring - Installation
INSTALLATION
1. Position the coil spring (1) on the axle pad isolator.
2. Raise the axle into position until the spring seats on the upper isolator.
3. Connect the stabilizer bar links to the axle bracket (3).See: Stabilizer Bar/Stabilizer Link/Service and Repair/Rear Stabilizer Link - Installation.