Borrego 4WD V6-3.8L (2009)
(5) Connect the LH injector connector (A) and LH ignition coil connector (B).
(6) Connect the LH knock sensor connector (A), LH/RH intake OCV connector (B) and LH exhaust OCV connector (C).
(7) Connect the MAP sensor connector (A), ETC connector (B), RH exhaust OCV connector (C), RH injector connector (D) and RH ignition coil
connector (E).
(8) Connect the power steering oil pressure switch connector (A) and RH knock sensor connector (B).
31. Install the cooling fan assembly (B) and connect the fan connector (A).
Tightening torque :
8.8 - 13.7N.m (0.9 - 1.4kgf.m, 6.5 - 10.1lb-ft)
