Borrego 4WD V6-3.8L (2009)
29. Connect the throttle body coolant hoses (A), breather hose (B) and tighten the surge tank stay bolts (C).
Tightening torque :
27.5 - 31.4N.m (2.8 - 3.2kgf.m, 20.3 - 23.1lb-ft)
30. Connect the engine wiring connectors.
(1) Connect the water temperature sensor connector (A) and oil temperature sensor connector (B).
(2) Connect the VIS solenoid valve connector (A), PCSV connector (B), RH oxygen sensor connector (C) and the RH exhaust camshaft CMP
sensor connector (D).
(3) Connect the LH intake camshaft CMP sensor connector (A), RH intake camshaft CMP sensor connector (B) and condenser connector (C).
(4) Connect the oil pressure switch connector (A) ,LH exhaust camshaft CMP sensor connector (B) and LH oxygen sensor connector (C).
