Borrego 4WD V6-3.8L (2009)
25. Install the LH/RH ignition coils (A).
26. Connect the RH ignition coil connector (A) and the injector connector (B).
27. Install the coolant pipe (A).
Tightening torque :
9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)
28. Install the surge tank (A).
Tightening torque :
9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)