Borrego 4WD V6-3.8L (2009)
6. Remove the snap ring (A).
7. Remove the pinion plug (A) and lock nut (B).
8. Remove the valve assembly (C), oil seal (D), bearing (E) and snap ring (F).
CAUTION:
Do not allow dust, dirt, or foreign materials to contact the disassembled parts and inside of the valve assembly housing.
9. Unscrew the rack bush and pull the rack bar out of the rack housing.
10. Reassembly is the reverse of the disassembly.
Inspection
Inspection
1. Rack bar
A. Check the rack gear for damage.
B. Check the rack bar for bend and deformation.
2. Valve assembly
A. Check for pinion gear tooth face damage or wear.
B. Check for oil seal contact surface damage.
C. Check for seal ring damage or wear.
D. Check for oil seal damage or wear.
