Borrego 4WD V6-3.8L (2009)
Steering Gear: Overhaul
Disassembly
Disassembly
1. Loosen the lock nut (A) and then unscrew the tie-rod end (B) and lock nut from the tie-rod.
2. Remove the bellows clip (A) and band (B) and then pull the bellows (C) away from the end of the tie-rod.
3. Remove the feed tubes (A) from the steering gear box.
4. Unscrew the tie-rod (A) from the rack bar (B).
5. Remove the lock nut (A) and yoke plug (B) and then pull out the yoke spring (C) and support yoke.