Borrego 4WD V6-3.8L (2009)
5. Remove the assist arm(A) and the trailing arm(B) from the rear axle carrier.
NOTE:
Remove the rear assist arm ball joint by using the special tool(09568-4A000).
6. Remove the rear stabilizer link(A) from the rear axle carrier.
7. Remove the brake caliper mounting bolts (A), and then place the brake caliper assembly (B) with wire as shown in the illustration.
Tightening torque :
83.3 - 98.0N.m(8.5 - 10.0Kgf.m, 61.4 - 72.3 lb.ft)