Rio5 L4-1.6L (2006)
2. Remove the pad shims (A), pad retainers (B) and pads (C).
INSTALLATION
1. Install the pad retainers (A) to the caliper.
2. Check the foreign material at the pad shims (A) and the back of the pads (B).
Contaminated brake discs or pads reduce stopping ability. Keep grease off the discs and pads.
3. Install the brake pads (B) and pad shims (A) on the pad retainer correctly. Install the pad with the wear indicator on the inside. If you are reusing
the pads, always reinstall the brake pads in their original positions to prevent a momentary loss of braking efficiency.
4. Push in the piston (A) using the SST (09581-11000) so that the caliper will fit over the pads. Make sure that the piston boot is in position to