Rio5 L4-1.6L (2006)
3. Apply the specified fluid to the entire surface of the rack bushing oil seal.
Recommended fluid: PSF-III
4. Install the oil seal (A) in the rack bushing (B).
5. Apply the specified fluid to the entire surface of the O-ring and install it in the rack bushing.
6. Apply the specified grease to the rack teeth.
Recommended grease:
Multipurpose grease SAE J310a NLGI No.2
NOTE: Do not plug the vent hole (A) in the rack with grease.
7. Insert the rack (A) into the rack housing (B) and install the rack bushing (C).
8. Using a special tool, install the oil seal and the ball bearing in the valve body housing.
