Rio5 L4-1.6L (2006)
2. Remove the snap ring (A).
3. Install the special tools (09517-29000, 09517-21500) as shown in illustration.
4. Separate the hub from the knuckle by turning nut (A) of the special tool (09517-21500).
5. Using a plastic hammer, remove the dust cover from the knuckle.
6. Remove the bearing inner race (B) from the hub (A) using the special tool (09495-33000).
7. Using the special tools (09495-33100, 09517-29000), remove the wheel bearing outer race (A) from the knuckle (B).