Rio5 L4-1.6L (2006)
5. Cut out the sealant using the sealant cutting tool [D(09861-31100)].
6. Remove the windshield (B) carefully using the glass holder (E) (09681-31400).
INSTALLATION
1. With a knife, scrape the old adhesive smooth to a thickness of about 2 mm (0.08 in.) on the bonding surface around the entire windshield opening
flange:
-
Do not scrape down to the painted surface of the body; damaged paint will interfere with proper bonding.
-
Remove the rubber dam and fasteners from the body.
-
Mask off surrounding surfaces before painting.
2. Clean the body bonding surface with a sponge dampened in alcohol. After cleaning, keep oil, grease and water from getting on the clean surface.
3. When attaching the molding, matching the corner of glass and molding and attach the windshield glass pad (E) to the designated place.