Rio5 L4-1.6L (2006)
4. Install the windshield glass (B) temporarily with making sure to position them on the center, and then place the alignment mark (C).
5. Apply a light coat of glass primer to the outside of the fasteners.
NOTE
-
Never touch the primed surface with your hand. If you do, the adhesive may not bond to the glass properly, causing a leak after the windshield
glass is installed.
-
Do not apply body primer to the glass.
-
Keep water, dust, and abrasive materials away from the primer.
6. With a sponge, apply a light coat of body primer to the original adhesive remaining around the windshield opening flange. Let the body primer dry
for at least 10 minutes:
-
Do not apply glass primer to the body, and be careful not to mixup glass and body primer sponges.
-
Never touch the primed surfaces with your hands.
-
Mask off the dashboard before painting the flange.
