Rio Cinco L4-1.6L DOHC 16V (2003)
3. Install the camshaft after lubricating the journal of camshaft with engine oil.
4. Install the cam carrier assembly.
5. Tighten the cam carrier bolts to the specified torque in two or three steps.
Tightening torque: 8.31 - 10.5 ft. lbs. (11.2 - 14.2 Nm, 1.15 - 1.45 kg-m)
6. Using special tool, camshaft oil seal installer (09221-21000), press the camshaft oil seal. Be sure to apply engine oil to the external surface of the
oil seal. Insert the oil seal along the camshaft front end install by driving the installer with a hammer until the oil seal is fully seated.
