Sorento 2WD V6-3.8L (2007)
6. Remove the steering wheel column cover after unscrewing 3 screws.
7. Unscrew the clock spring tightening screws. (4EA)
8. Disconnect the clock spring wiring harness and the horn wiring harness connector from the clock spring.
INSTALLATION
1. Remove the ignition key from the vehicle.
2. Disconnect the battery negative cable from battery and wait for at least three minutes before beginning work.
3. Connect the clock spring harness connector and horn harness connector to the clock spring.
4. Install the clock spring with 4 screws.
