Sorento 2WD V6-3.8L (2007)
Air Bag: Procedures
CHECKING OF SHORT OR OPEN CIRCUIT
Refer to the following tips for checking of short or open circuit.
1. Shorting bar is located on the upper side of pin number from 2 to 25 of SRSCM connector.
2. When checking for a short circuit, the shorting bar must be opened. Use a plastic clip to put into as a shorting bar opener for disconnecting
shorting bar.
3. Use SST Dummy adapter (0957A-2G000) to measure resistance or voltage for checking of short or open circuit.
Plug it into DAB (BPT) connector to avoid enlarging or damaging the connector pins.