Sportage 2WD L4-2.0L DOHC (1996)
9. Take off the inlet pipe assembly which has been released and move it to the maintenance area.
Installation
WARNING: FUEL IS EXPLOSIVE. WHEN WORKING ON FUEL SYSTEM PARTS, MAKE SURE TO SUPPLY ADEQUATE
VENTILATION TO THE WORK AREA. DO NOT SMOKE, AND KEEP SPARKS AND OPEN FLAMES AWAY.
1. Raise the vehicle on a hydraulic lift to a level where access can be gained at the right rear wheel well area.
2. Install the attaching bolt holding the inlet pipe assembly to the vapor separator assembly.
3. Connect the inlet pipe assembly/vapor separator assembly to the hose-joint and the fuel hose.
4. Install the attaching bolts to the bracket holding the inlet pipe assembly to the vehicle frame.
5. Install the nut to the attaching bracket for the neck portion of the inlet pipe assembly.
6. Lower the vehicle on the hydraulic lift to ground level. Install three screws to the neck portion of the inlet pipe assembly.
Fuel Door
