kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Evaporative Vapor Pressure Sensor|Description and Operation|Page 1545 > < Evaporative Vapor Pressure Sensor|Description and Operation|Page 1543
Page 2
background image

7. Using a voltmeter measure voltage at all three (3) Fuel Tank Pressure Sensor terminals in the fuel tank sending unit connector.

WHT/BLK - 2.0 - 3.0 V (signal return voltage/base reading)
If signal voltage reads 5.0 volts, check the sensor ground wire.
GRN/YEL - 0.0 V (sensor ground)
YEL/GRN - 5.0 V (reference voltage)

8. In the engine compartment disconnect the hose from the fuel tank at the Evaporative Emissions Canister.

Evaporative Vapor Pressure Sensor|Description and Operation|Page 1545 > < Evaporative Vapor Pressure Sensor|Description and Operation|Page 1543