Sportage 2WD 2Dr L4-2.0L (2002)
Seals and Gaskets: Service and Repair
Pinion Oil Seal Replacement
Required SST:
-
Companion Flange Holder: K95-5013-D
-
Universal Handle: K95U-0003-G
-
Oil Seal Installer: K95-5003-D
1. Raise vehicle; remove wheels and brake drums.
2. Remove the drain plug and drain gear oil into a container.
3. Mark for identical installation position and remove driveshaft.
4. Using an inch-pound (ham) torque wrench, measure and record the torque required to maintain rotation of the pinion.
5. Using SST K95B-5013-D, remove pinion lock nut.
6. Remove companion flange.
7. Remove the oil seal.