Sportage 4WD L4-2.0L (2005)
10. After applying the specified fluid to the oil seal, install it in the rack housing, and fix the valve body assembly (B) and O-ring in the gear box (A).
11. Install the tab washer and the tie rod and stake the tab washer (A) end at two points over the tie rod.
NOTE:
1. Align the tab washer pawls with the rack grooves.
2. Always use a new tab washer
12. Install the bushing (A), rack support yoke (B), rack support spring (C), lock nut (E) and yoke plug (D) in the order shown in the illustration. Apply
semi-drying sealant to the threaded section of the yoke plug before installation.
