Sportage 4WD 2Dr L4-2.0L (2002)
23. Remove the blower motor assembly from the vehicle.
Installation
1. Check the mounting area for the blower motor assembly to make sure there are no wiring harnesses, connectors or cables that would prevent
proper installation.
Fig. 13 Blower Unit Removal
2. Position the blower motor assembly on the bulkhead and retain with two nuts and two bolts.
NOTE: Over-tightening may cause the fresh air/recirculation door to bind.
Tighten nuts and bolts to 80 lb-in (9 N.m).
